Air Driven Liquid Pumps

Product Detail

Shenzhen IVS Flow Control Co.,Ltd is one of the leading air driven liquid pumps manufacturers and suppliers in China, welcome to wholesale customized air driven liquid pumps from our factory.

Air Driven Liquid Pumps up to 73,000 PSI (503 Mpa)

FEATURES & BENEFITS

         

• High output capacity and outstanding performance provided at low cost.

• Designed for easy maintenance with minimum components and joints

• Both pressure and volume of flow are easily and accurately controlled by a pressure regulator installed in the air supply line.

• Simple operating principle - a larger air-driven piston delivers pressure to a proportionally lesser diameter hydraulic piston, providing fluid flow at relatively higher pressures.

• Complete flexibility – IVS boosters adapt to a wide variety of applications, from simple manual controls to fully automatic operation. Air motors are interchangeable for most models within each series.

• Cycle and stop automatically - liquid pumps cycle automatically. When compressed air is first applied to the pump, it will cycle at its maximum speed producing maximum flow. The pump will then gradually start to cycle at a slower rate as the pressure in the receiver increases and stop automatically when the output pressure force and the air drive force is balanced to create a stall condition. At this point, the pump will maintain pressure without energy consumption, thus providing an economical source for hydraulic power.

• Wide range of applications - can operate with a variety of fluids

• High output capacities up to 73,000 PSI (503 Mpa) or even 700 Mpa

• Wide range of output capacities – less than 150 PSI (1 Mpa) air pressure is required to attain maximum rate of flow

TYPICAL APPLICATIONS

    

• Scissor jack lifts, aircraft jacks

• Clamping devices

• Punches and pin presses

• Valve actuation

• Roller and bolt tensioning

• Torque wrenches

• Press system overload

• Pressure testing

• Crimping

• Trash compactors

ORDERING AIR DRIVEN LIQUID PUMP

Liquid Pump Series	Liquid Pump    Model	Liquid Pump    Output Ratio	Liquid Pump Output    Volume/Stroke (in3)	Liquid Pump Output    Volume/Minute (ml)	Pump Connection (all female thread)
					Air-in	Air-out	Fluid-in	Fluid-out
LP10-4	0003	5:1	2.59	1699	1/4" NPT	3/8" NPT	1/2" NPT	3/8" NPT
	0005	10:1	1.39	912	1/4" NPT	3/8" NPT	1/2" NPT	3/8" NPT
	020	35:1	.384	252	1/4" NPT	3/8" NPT	3/8" NPT	3/8" NPT
	030	55:1	.245	161	1/4" NPT	3/8" NPT	3/8" NPT	3/8" NPT
	050	100:1	.138	91	1/4" NPT	3/8" NPT	3/8" NPT	3/8" NPT
	080	140:1	.096	63	1/4" NPT	3/8" NPT	3/8" NPT	3/8" NPT
	125	220:1	.061	40	1/4" NPT	3/8" NPT	3/8" NPT	3/8" NPT
LPD5 & LP10-5	005	10:1	2.07	1358	1/2" NPT	3/4" NPT	1" NPT	1/2" NPT
	010	20:1	1.39	912	1/2" NPT	3/4" NPT	1" NPT	1/2" NPT
	015	25:1	.981	644	1/2" NPT	3/4" NPT	1/2" NPT	1/2" NPT
	018	30:1	.861	565	1/2" NPT	3/4" NPT	3/8" NPT	1/2" NPT
	020	35:1	.751	493	1/2" NPT	3/4" NPT	3/8" NPT	3/8" NPT
	030	55:1	.464	304	1/2" NPT	3/4" NPT	3/8" NPT	3/8" NPT
	040	70:1	.384	252	1/2" NPT	3/4" NPT	3/8" NPT	3/8" NPT
	045	85:1	.310	203	1/2" NPT	3/4" NPT	3/8" NPT	3/8" NPT
	060	105:1	.245	161	1/2" NPT	3/4" NPT	3/8" NPT	3/8" NPT
	080	140:1	.188	123	1/2" NPT	3/4" NPT	3/8" NPT	3/8" NPT
	100	195:1	.138	91	1/2" NPT	3/4" NPT	3/8" NPT	3/8" NPT
	160	280:1	.096	63	1/2" NPT	3/4" NPT	3/8" NPT	3/8" NPT
	250	440:1	.061	40	1/2" NPT	3/4" NPT	3/8" NPT	3/8" NPT
	350	555:1	.048	31	1/2" NPT	3/4" NPT	3/8" NPT	HF4
LPD6,LP10-6	015	25:1	3.38	2217	1/2" NPT	1" NPT	1" NPT	3/8" NPT
	020	35:1	2.49	1633	1/2" NPT	1" NPT	1/2" NPT	3/8" NPT
	030	55:1	1.50	984	1/2" NPT	1" NPT	1/2" NPT	3/8" NPT
	050	95:1	.928	609	1/2" NPT	1" NPT	3/8" NPT	3/8" NPT
	080	145:1	.623	409	1/2" NPT	1" NPT	3/8" NPT	3/8" NPT
	100	180:1	.490	321	1/2" NPT	1" NPT	3/8" NPT	3/8" NPT
	151	240:1	.375	246	1/2" NPT	1" NPT	3/8" NPT	3/8" NPT
	201	330:1	.275	180	1/2" NPT	1" NPT	3/8" NPT	3/8" NPT
LPL10	66	64:1	8.59	5635	3/4" NPT		1/2" NPT	1/2" NPT
	114	113.9:1	4.83	3168	3/4" NPT		1/2" NPT	1/2" NPT
	177	177.8:1	3.09	2027	3/4" NPT		1/2" NPT	LF9
	256	256:1	2.15	1410	3/4" NPT		1/2" NPT	HF9

Note: Limited models listed. Please consult our Sales Representative for High Pressure Components if you don't see models that meet your requirement.